Banners with Grommets Buyer’s Guide

Grommets can be described as metal rings such as brass grommets. They are attached to the corners of banners to make them easy to hang and increase their durability. If you want your banners to last very long, they are essential. A hemmed grommet for a mesh banner is a must. If the grommet is not hemmed, the banner material could tear or rip vinyl fabric or polyester fabrics.

It’s not enough just to drill a hole in the banner’s four corners. If it is hung that way, it may tear. Grommets serve to strengthen and protect the hole. Grommets can be used to allow banners to hang straight without any tearing if done correctly. Indoor banners are less susceptible to this problem because there isn’t any wind to worry about.

A post pocket is an open-ended pocket made from a banner. It can be folded backward and sewn at one end or both ends to create an opening. These pockets can be used to slide on a pole or thread a rope for hanging.

But what exactly is a grommet?

You should be familiar with grommets when hanging your custom banner. What exactly are grommets, and how do they work? Grommets are small rings made of metal that can be used to reinforce holes in a particular material. They can be used to protect and hang your banner. Usually, you’ll see eyelets on curtains. Grommets also work well for flag banners or retractable banners.

Here’s a quick summary of the role played by grommets:

• They are made up of two pieces of different materials. This includes rubber, plastic, or
• different metals among many others.
• You can create a solid ring/hole by pressing two eyelets together.
• Pass ropes and bungee strings, strings, hooks, or any other suspension devices can be made with this ring.
• Grommets don’t come in two pieces like eyelets. Instead, they are one-piece.

Types of Grommets

Grommets are now widely used all over the globe. They can be used to hang a horizontal or a vertical banner. Most commonly, they are used to hang vinyl banners advertising products. They can also be used to hold down a canvas. Grommets are made from many materials, including metal, rubber, and plastic. Two parts make up the grommets:

• The washer is also known as the “flat ring” This is typically all you need for advertising flag banners and standard fabric banners.
• The inner serrated ring with the eyelet is called the “eyelet.”

Banner stands and grommets are often used together. Grommets for custom banners are attached to the flat ring by compressing the inner area. This creates a secure connection between the two components. Grommets can attach to almost any material, even banners made of fabric. They can be used to create great designs and are often available in bright colors that match the banner theme.

Rubber Grommets

Customers use rubber grommets to refrain from having sharp edges. Sometimes the metal eyelets’ sharp edges can damage the material. They are used to attach the banner. A rope is an example of one material that can fray when a metal eyelet is damaged. Large rubber grommets are a better option. You can use either nickel-plated brass grommets or any other type of metal grommets if you have a banner made of vinyl.

Plastic Grommets

Plastic eyelets stop sharp edges from slipping into their tracks. This protection isn’t provided by rubber eyelets. Plastic grommets can be completely synthetic. In some cases, these plastic eyelets are coated with a plastic coating. These devices are used to protect the rope and string from breaking if the ring is damaged. Rubber and plastic grommets are also used with a banner stand lights display because they insulate against any possible shocks from the lighting.

Steel Grommets

You can add metal eyelets to your banners, which could be made from brass or any other type of metal. Nickel-coated brass is one of the most widely used materials. They’ve proven their reliability. Metal eyelets can be a long-lasting and environmentally friendly solution. They have become an industry standard.

What Are The Standard Grommet Sizes?

Several types of grommets can be used to make banner sizes:

• 3/16″ (popular with a step and repeat setup)
• ⅜”
• ½”
• 1″
• 7/16″

The list of loop sizes refers to the inside surface of the fastener. Out of all the alternatives, the most suitable design for banners is the 3/8 inch size. This size is standard, and it does not change the visual appearance of a display, even if it’s small.

Where are the grommets located?

Grommets are included with custom hanging banners or vinyl banners. This is typically located at every corner. Most people prefer metal grommets, especially brass. They are sturdy, resistant, and allow you to use heavier hooks to hang your signs. The fabric can then be well preserved and protected against tearing.

Banners of significant length may have extra grommet located:

• At the top
• At the bottom middle
• Each 4 inches

Simply specify the quantity you require for a personalized banner order. Next, let us know the details of how you would like grommets arranged. Our team will then make your banner as per your specifications. Any banner can be modified by Platon Graphics’ fastener structure. Our standard position can also be used. Either way, your banner will be made and shipped in a safe, strong, and durable manner. A hem is also recommended if you want a vinyl banner to be made.

Best Locations to Hang Grommet Flags

It is very common to hang or hook banners between bollards. This is a common display technique, especially for retractable banners. Grommets should be used to make sure the banner is properly stretched with a zip-tie and a hook. You should place grommets at least at the corners of any surface. These can be used in this manner:

• Rope
• Zip ties
• Screws
• Hooks

It is better to have one central post for larger banners. This will ensure that your banner stays taut. This will allow you to present yourself better at events. This will make your event more enjoyable and prevent any potential problems. They can protect you from any damage that may occur in extreme weather conditions. If the weather is severe, it’s better to remove the banner. This is true especially if the material does not pass air. This material is the strongest against strong wind and other forces. If the banner will survive in windy conditions (such as with pole banners), wind-slits are recommended.

The banners can also be hung from higher points. This can be done with materials of varying strength:

• Rope
• String
• Metal chains
• Fishing lines
• Suction cup

The rope must be long enough that it can pass through the grommets to return to the anchor point. The banner stands have screw eyes that allow you to thread the rope through. These materials can’t be attached to banners without the eyelets. This is why all of our banners have a welded seam.

You can also display a banner to a mast by using grommets or a pocket at the mast. In attaching grommets onto a pole, it is best to use metal clips and zippers. To receive 1/4 clips, the pole must be of the correct design.

Mast pockets are very useful when sliding a mast into the banner’s top or bottom. This hanging method is not recommended if you have large banners. Instead, attach banner flags that you design to masts by using a banner stand.

Difference Between Banners with Grommets

There are many kinds of banners, including popular vinyl banners that have grommets. These include custom pole and mesh banners of 9, 11, 13, or 15 oz. Drop flag banners and vertical banners are included as well. This also covers fabric mesh banners as well as angled banner banners. These can all be strengthened with grommets.

Different heavy metal bases may be used depending on the purpose of banners. This holds true for both the shape and application of banner designs. Platon Graphics only uses vinyl banner material. Our 15 oz vinyl banners offer the strongest possible. An 11-ounce vinyl banner, however, is also strong enough for any situation.

Grommets can be used to increase the versatility and angle of flag banners. They are suitable for all types of advertising banner flags as well as flexible feather banners. Grommets are essential for ensuring that your banner is effective. Grommets will also ensure the strength of your banner signs, x stands, and plastic banners. The same goes for graduation banners, parade banners, and many other items.

Go get your Customized Grommet Banners

Platon Graphics offers customizable banners and other banner products. We are unrivaled by any competitor because our work is of the highest quality and standard and we provide grommets that are of the highest quality. This is true for all of our custom vinyl banner jobs within the United States. You can find everything from common banners to very large banners to breakaway banners and many more.

We have the perfect solution for you, whatever your canvas style is or what kind of finish. We can provide banners in any finish you desire, including matte or glossy. We offer many design templates. You will be pleased with our banner templates and affordable signage options. BBB is your first option for banners of high quality and durable options in all sizes. Reinforcing grommets are always included on custom banners. Strong hems are also used that we can weld with a variety of finishes.

Select your custom banner style and we’ll ensure you get what you want. We can help you get started with any size banner. You will never regret getting the stunning custom-sized banner design that you can use for your printed streamer. Fast printing and free shipping (between 1 and 3 business days) are guaranteed. Our customer service team is unparalleled. Start your print banner project today!

Explore More

• Our Service Areas

Discover the regions where we offer our top-notch services. Learn More »

• About Platon Graphics

Get to know our mission, vision, and the team behind our success. Read More »

• Contact Us

Have questions or ready to start your project? Get in Touch »

Get in touch with Platon Graphics

banners with grommets near me Back To Top